background image

Brake mode, knob to the left.

On the know to the right you can put the bike into 3 different braking 
modes. This ranges from a free wheel experience, much of what you feel on 
an MTB, which is suited for mellow riding on flats, to a hard engine brake, 
which reminds the rider of the engine break on a 4-stroke motorcycle, 
which is suited for technical race tracks or in the woods. All the energy from 
the braking goes back into the battery for extended range.

Brake mode 1

No motor brakes. Gives the same sensation as riding a bike, perfect for mel-
low riding and the ultimate freedom experience.

Brake mode 2

Moderate engine brake. As you release the throttle you feel the bike slowing 
down at a slow pace. This can boost your confidence when riding a bit 
more technical terrain as you get better control over the bike. The braking 
power is regenerated to the battery for extra range.

Brake mode 3

Hard engine break. When releasing the throttle, the bike will slow down 
significantly. This could be uncomfortable for novice riders as the braking 
is quite hard. This brake mode is best suited for technical tracks where full 
control for the bike is needed. All the braking power is regenerated to back 
to charge the battery for extended range.

Power mode, to the right

There are 3 different power modes to choose from when riding the bikes.
Never ride the bike above your comfort level and always ride according to 
your personal riding skills. We always recommend a new CAKE-rider to start 
on the first mode to get used to the bike and the differences between an 
electric motor and an Internal combustion engine. The 3 different ride 
modes have different attributes in terms of top speed, acceleration and 
torque to suit riders of all riding levels, from beginners to professionals.

Power mode 1 - Explore

This mode is 

ALWAYS recommended when riding a CAKE bike for the first 

time. It has a limited top speed of 45kmh (28mph) and soft acceleration. 
This mode still has a high torque for ridability offroad as well as something 
for new riders to progress with. This Mode is perfect for tracks where 
control is more valued than power.

Power mode 2 - Excite

With a top speed of 70kmh and a good acceleration, this mode is perfect 
for enduro riding out in the woods.

Warning LED

Battery indication on Dashboard

Battery SOC

Brake mode

Drive mode

Содержание Kalk













Отзывы: