-8-
1.
Main Menu
Operation of Function Menu
-7-
SEARCH
UHF
V-L
V-H
PICTURE
BRIGHT 50
CONTRAST 50
COLOR 50
00
SHARP 50
NOISE REDU. OFF
TINT
TIME
CLOCK 0:07
OFF TIMER
OFF 0:00
ON TIMER
OFF 0:00
POSITION 0
POSITION 099
BAND V-L
MFT
SEARCH
AUTO TUNE
SEARCH
1. 1 Press
MENU
key, menu
will appear, as shown in the
right figure.
1.2. Select from the following five
Items by pressing MENU key.
2.1 Automatic Search
1) Press "P+/P-" button to choose the
option of automatic search. (Or press
"MENU" button on the panel for 5
seconds to enter the state of automatic
search.)
2) Press "V+" button to start automatic
search. Press "V-" to stop automatic
search.
3) It will return to "0" automatically after
the end of automatic search.
2.2 Manual Search
1) Press "P+/P-" button to choose the option of manual search.
2) Press "V+/V-" button to start manual search.
3) Each program found in search will be stored in TV position.
2.3 Wave Band
1) Press "P+/P-" button to choose the option of wave band.
2) Press "V+/V-" button to switch wave band.
2. Search Menu
4.1 Clock Adjustment
1) Press "P+/P-" button to choose the
option of time.
2) Press "V+/V-" button to set the
current time. (Holding "V+/V-" button
will increase/decrease the clock by
ten minutes.)
4.2 ON Timer/OFF Timer
3) Press "V+/V-" button to set the time
for turning off the unit. (Holding "V+/V- " button will increase/decrease
the clock by ten minutes.)
4) Set the time for turning on the unit in the similar way.
4.3 Position
1) Press "P+/P-" button to choose the option of position.
2) Press "V+/V-" button to adjust the position. The position now set is the
default position for timing on.
1)Press "P+/P-" button to choose the
option of "OFF TIMER"
Press "V+/V-" button to set the OFF
TIMER mode same day or every day
2) Press "P-" button choose the option of
OFF TIMER mode
same day or every day
4. Time setting
Press "MENU" button to choose the
menu of "PICTURE". Press "P+/P-"
button to enter the option of image
setting.
3.1 Press "P+/P-" button to choose
the option to be adjusted.
3.2 Press "V+/V-" button to adjust the
content of the option. In this menu,
the luminance, contrast, color,
quality and noise reduction may be
adjusted by pressing "P+/P-" button
directly.
Note:
will be displayed only in NTSC system.
TINT
3. Image Setting
Press
"
MENU
"
button to choose time option. Set the appropriate
time based on 24 hours system.
PICTURE TIMER SEARCH FUNCTION SOUND
