FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (205) 702-9101.
©2021 CAHABA. ALL RIGHTS RESERVED.
4
JUNIPER 48 IN. VANITY
Installation Instructions
REMOVING & INSTALLING SLIDE-OUT SHELF
The slide out shelf is pre-installed in the vanity. Should
you need to remove it for any reason, refer to the
following instructions.
1. Extend the slide-out self to its full length.
2. Locate the toggle at the very back of the slide, in the
channel and press it down. This will release the main
slide mechanism.
3. Hold the toggle down and carefully pull out the shelf
until it is free from the vanity.
NOTE: To reinstall the slide-out shelf, align the slide
NOTE: To reinstall the slide-out shelf, align the slide
mechanism with the track and gently push the shelf
mechanism with the track and gently push the shelf
into place within the cabinet.
into place within the cabinet.
ADJUSTING SHELF
The adjustable shelf is pre-installed in the vanity. Should
you need to adjust it for any reason, refer to the following
instructions.
4. Unscrew the shelf from the brackets and lift out of
the vanity.
5. Pull the bracket out and move to desired location.
Make sure all brackets are on the same level.
6. Replace the shelf.
NOTE: Once the shelf is replaced, secure the shelf in
NOTE: Once the shelf is replaced, secure the shelf in
place using screws removed in step one.
place using screws removed in step one.
PRESS TOGGLE DOWN TO
RELEASE SLIDE MECHANISM.
SLIDE THE SHELF OUT WHILE
HOLDING DOWN THE TOGGLE.
TO RE-INSTALL, LINE THE SLIDE MECHANISM
WITH THE TRACK AND PUSH INTO PLACE.
SAVE THE
SCREWS TO
SECURE THE
SHELF AFTER
REINSTALLING
MAKE SURE BRACKETS
ON SAME LEVEL
REPLACE THE
SHELF AND
SECURE THE
SHELF IN PLACE
