Caffitaly System S14, Инструкция, Страница: 10 / 12

10
English
• When the fi rst step is complete, the B button lights up and a beep is emitted and
repeated. The water tank is empty.
• Carefully rinse out the water tank and fi ll it with fresh drinking water (Pic.4).
• Empty and rinse out the used capsule drawer, the drip tray and the 1 litre container used
previously and reposition them correctly (Pic.15).
• Press the
B
button to start the rinse cycle.
• Rinse water (about 500 ml) will be run through the appliance. During this step the
D
indicator light blinks alternately (
YELLOW
twice and
RED
twice).
• When the rinse cycle is complete, the machine emits a beep and the buttons
A
-
B
-
C
blink at the same time; lthe machine is warming up. When the buttons turn on and
remain steadily lit, the appliance is ready for use.
• Carefully rinse out the water tank and fi ll it with fresh drinking water (Pic.4).
• Empty and rinse out the used capsule drawer and drip tray (Pic.6).
No coffee is brewed.
The D indicator light
blinks RED .
The water tank is empty. Fill the tank with fresh water.
Press a button to reload the circuit.
When the buttons remain steadily
lit, the appliance is ready for use.
The coffee is not hot
enough.
- Cold cups / mugs.
- Scale build-up in machine.
- Preheat the cup.
- Descale the machine.
The lever cannot be
lowered.
The used capsule drawer
is full. Capsule stuck
inside the machine.
Empty out the used capsule
drawer.
Remove the jammed capsule.
The D indicator light
is on and steadily lit in
RED .
Heating problems. Contact the Maranatha Customer
Service line 02 9894 6247 or return
to your store of purchase.
When a coffee
dispensing button is
pressed, the machine
seems to start running,
but stops without
dispensing coffee or
after dispensing only a
small amount.
Incorrect quantity
programming.
Reprogram the quantity
corresponding to that button. See
ch. "Programming the quantity of
coffee in a cup".
A very small amount
of coffee is dispensed
very slowly.
The C button has been
used with an espresso
capsule.
Use the A or B .
Troubleshooting
PROBLEM CAUSE SOLUTION