Caffitaly System S11HS, Инструкция

Страница: 23 / 72

23
Daily maintenance
• Take out the used capsule drawer; empty and rinse it (Fig. 6).
• Remove the drip tray and the grid (Fig. 7). Empty the drip tray. Wash the parts with fresh
water.
• Remove the water tank (Fig. 5); empty and rinse it.
• Gently turn the coffee dispensing spout clockwise by approximately 45° (Fig. 15) until it
comes to a stop, then remove it. Remove the top cover of the coffee dispensing spout
(Fig. 16) and wash the components in hot water.
• Remove the outside of the steam dispensing tube and wash it in hot water to remove any
milk residue (Fig. 17). Clean the inside using a damp cloth.
Use a soft cloth and a neutral deter-
gent to clean the surfaces of the
appliance. Do not use jets of water to
clean the appliance. The plastic parts of the ma-
chine, including the water tank,
are NOT dishwasher safe.
Changing the gasket
WARNING! If the gasket shows signs of wear (small cuts or cracks,
deformations, ...) you can replace it easily using the spare gasket supplied in
the pack.
Perform the following operations only when the machine is cold; contact with
the inside surfaces of the machine could cause burns.
• Raise the lever (Fig. 1).
• Find the gasket.
• Remove the worn gasket (Fig. 18), extracting it if necessary with the aid of a screwdriver.
• Insert the new gasket, ensuring that it fi ts snugly in place.
• Close the lever (Fig. 3).
English