caenrfid qIDmini R1170I, Руководство пользователя

Страница: 47 / 77

BUFFER PROFILE - qIDmini Technical Information Manual 47
6 BUFFER PROFILE
Introduction
For details on the available profiles and on the activation method please refer to § PROFILE paragraph page
56.
In the BUFFER mode the reader is connected via Bluetooth to the host, executes inventories of tags by
pressing the trigger button and stores the EPCs into the internal buffer, even in case of temporary missing
of Bluetooth communication. When the Bluetooth link is up, the reader can send the buffered data if
requested by the host. Stored data can be downloaded to any device except for iOS devices.
The buffer size is 64KB.
To perform the tag inventory just hold down the trigger button for the desired time.
The display shows the number of read tags and information on the memory usage (used/total), for
example:
TAGS 012
01K/64K
The BUFFER mode is supported only by the HID version of the reader (mod. WR1170IEHIDP,
WR1170IUHIDP WR1170IENFHP, WR1170IUNFHP) and not by the Apple version (mod. WR1170IUAPLP,
WR1170IEAPLP).
Communication Setup
The reader can be connected to the USB or Bluetooth to a PC or Android devices.
Android devices
1. On your Android device, go to Setting and enable the Bluetooth. A list of the available Bluetooth
devices is shown: