qID R1240I Technical Information Manual
Firmware Upgrade
The qID R1240I Upgrade Tool is available for free at
qID R1240I page
or in the
Software and Firmware Area
of the CAEN
RFID Web Site (download the
R1240I Suit
zip file).
The qID R1240I firmware upgrade can be managed via Bluetooth.
In order to upgrade the firmware, follow the steps below:
1.
Download the
R1240I Suit
zip file from the
qID R1240I page
or in the
Software and Firmware Area
from CAEN
RFID Web Site and unzip it. The zip file contents: the
Flash Loader Demonstrator,
the
R1240I_Upgrade
tool
and
the .bin firmware upgrade image
.
2.
Install the
Flash Loader Demonstrator.
3.
Run the program R1240I_Upgrade, select the reader port to be updated (COM Bluetooth) and press Upgrade
Micro
. Wait a few seconds for the appearance of the dialog box as in Figure STM32Fupdate. Please pay
attention to the fact that
OK
at this stage must not be pressed (it is pressed only at the end of the entire
procedure in step 8).
