Caen RFID R1280I, Техническое руководство

Страница: 20 / 83

CONFIGURATION MENU - skID Technical Information Manual 20
SYSTEM
Bluetooth and USB communication
Access the configuration menu as explained in the Introduction paragraph page 12.
Use this section in order to set the communication interface:

COMM INTERFACE: in the COMM INTERFACE box you can set two different communication
interface:
o
USB
o
Bluetooth (BT or BLE, depending on the firmware uploaded into the reader's Bluetooth
module)
Y
Warning: To save the changes click on the SAVE button (check the green dot on the bottom
right side of the sidebar). On the main application window click on File  Disconnect . Power off
the reader, disconnect the USB cable and then power on the reader, the new settings are active.