- Lepton
7
x1 - Lepton
7
x4 - Technical Information Manual
9
2
TECHNICAL SPECIFICATIONS
Technical Specifications
Frequency Range
865.600÷867.600 MHz (ETSI EN 302 208 v3.3.1)
902÷928 MHz (FCC part 15.247)
RF Power
Configurable from 10 dBm to 30 dBm (from 10 mW to 1 W) conducted
power
RX Sensitivity
-85dBm -10%PER, assuming 20 dB antenna RL @ 30 dBm output
Antenna VSWR
Requirement
< 2:1 for optimum performances
Antenna Connectors
-
1 MMCX jack (Model R7101C Lepton
7
x1)
-
4 MMCX jack (Model R7104C Lepton
7
x4)
Frequency Tolerance
±10ppm over the entire temperature range
Number of Channels
4 channels (compliant to ETSI EN 302 208 v3.3.1)
50 hopping channels (compliant to FCC part 15.247)
Standard Compliance
EPC C1G2 / ISO18000-63
I/O Interface
4 I/O lines 3.3V level
I
out
=
8mA max
Connectivity
-
UART Serial Port
•
Baudrate: from 9.6 to 921.6 kbps, default 921.6 kbps
•
Databits: 8
•
Stopbits:1
•
Parity: none
•
Flow control: none
-
3.3 V I/O voltage level
Power Supply
3.2 ÷ 5.25 V DC
Power Consumption
-
8W max @ RF out = 30 dBm
-
80 mW in idle mode
–
Ready to receive commands
Dimensions
-
Model R7101C Lepton
7
x1:
(L) 51 x (W) 42 x (H) 8.1 mm
3
2.01 x 1.65 x 0.32 inches
3
-
Model R7104C Lepton
7
x4:
(L) 60 x (W) 42 x (H) 8.1 mm
3
2.36 x 1.65 x 0.32 inches3
Operating Temperature
-20°C to +70°C
Weight
−
30 g (Model R7101C Lepton
7
x1)
−
34 g (Model R7104C Lepton
7
x4)
Tab. 2.1: Lepton
7
x1 - R7101C Lepton
7
x4 R7104C Technical Specifications
Warning
: The RF settings must match the operating country/region to comply with local laws
and regulations.
The usage of the reader in different countries/regions from the one in which the device has
been sold is not allowed.
