- Lepton
3
x1 - Lepton
3
x4 - Technical Information Manual
23
3.
On the main screen click on
File
→
Connect.
A Connection window will open
.
Select the C
onnection Type
(RS232) and specify the RS232 port (COM 9 in this example). In order to connect to the module via Easy
Controller software the serial settings shall be added to the COM port address since R3101C
Lepton
3
x1/R3104C Lepton
3
x4 module has a different baudrate (921600bps) from default value used
by the SW:
4.
To verify if the connection with the reader has been established, check the green dot on the bottom
left side of the sidebar and on the
READER INFORMATION
box you can find information on reader
model, serial number and firmware release:
