Caen RFID Hex R1290I, Техническое руководство

Страница: 12 / 57

GETTING STARTED - Hex R1290I Technical Information Manual 12
2 GETTING STARTED
Introduction
This quickstart guide will help you to get started with your Hex (Model R1290I) reader.
The reader can be configured in three different profiles:

EASY2READ (factory default): choosing this option you select the CAEN RFID easy2read communication
protocol. Select this option in order to control the reader using the CAEN RFID Easy Controller Application or
the SDK (Software Development Kits) library. For details on the use of the EASY2READ profile please refer to
this quickstart guide.

HID : choosing this option you select the keyboard emulation protocol. For details on the use of the HID
profile please refer to § HID PROFILE page 45.

CUSTOM : the use of this profile allows the user to upload their own scripts to the reader. For details on the
use of the Custom profile please refer to § CUSTOM PROFILE page 47.
The reader is sold with the factory profile set to EASY2READ . This guide helps you to getting started with your reader
using the EASY2READ profile.
For more detailed information on reader configuration, connections and setup options please refer to the next
chapters.
Connecting to the Hex Reader using the Easy Controller via USB
The Hex reader can be connected to a PC using the provided USB cable and it is detected by the PC as an emulated
serial port.
Warning: If your PC is running a Windows version older than Windows 10, in order to correctly operate
with the reader, you need to install the Gadget Serial USB driver . You can download it for Windows based
systems from the Hex R1290I web page , Downloads section or from the Software and Firmware download
area .
Warning: If your PC is running a Windows version older than Windows 10, in order to correctly operate with the
reader, you need to install the Gadget Serial USB driver . You can download it for Windows based systems from the Hex
R1290I web page , Downloads section or from the Software and Firmware download area .
1. Check for the supplied accessories (see § Accessories page 11). Plug the USB cable into your computer and
connect the other end of the USB cable to the reader.