AMC HV-PANDA User’s Manual
14
Hot-Swap Handle
Hand grip that provides user interface that initiates the
hot-swap sequence and allows module removal from the
chassis.
Module LEDs
Leds required by AMC.0 R2.0 standard. 3 Leds are
required:
-
BLUE LED: indication of hot-swap and
communication status;
-
LED 1: red color, provides indication of faults;
-
LED 2: green color, indicates
“in service”
status.
Logic GND
The reference potential for logic signals and power levels
Shelf GND
The electrical potential of the MTCA chassis metal frame
Payload Power
12V power provided by the PM
Management Power
3.3V power for board management section
Additional terms are available in the
“Glossary”
section of the relevant PICMG
specification.
