CAEDEN Linea ?10, Руководство пользователя и гарантия, Страница: 70 / 76

Pairing Your Linea No10
The Linea No10 can store up to 8 Bluetooth ®
hosts at one time.
1. To power on and pair your headphones for the
first time, press and hold the
CENTER
button for
2 seconds. The
LED
will flash alternately
RED
and
BLUE
to indicate that the headset is in
pairing mode.
2. Open the Bluetooth ® settings on your
smartphone, tablet, computer or other mobile
device. Follow your device’s pairing instructions
and select the device named “Linea No10.”
3. The
LED
will blink
BLUE
twice to indicate that
the Linea No10 is paired with your device.
4. To pair your Linea No10 with another device,
start with the headset in power
OFF
mode. Hold
the
CENTER
button for 6 seconds. The
LED
will
flash alternating
RED
and
BLUE
to indicate that it
is ready to pa ir.
Note: When more than 8 hosts are paired, the oldest paired
device will be automatically dropped when a new device is
paired. You may completely clear the list of stored devices by
pressing
VOLUME UP
&
VOLUME DOWN
, while the power is on,
until the
LED
flashes
RED
&
BLUE
twice.
The Linea No10 is:
in pairing mode.
paired with your device.
×2
Linea Nº10
Linea Nº1
Linea Nº2
Pairing Your Linea No10
The Linea No10 can store up to 8 Bluetooth ®
hosts at one time.
1. To power on and pair your headphones for the
first time, press and hold the
CENTER
button for
2 seconds. The
LED
will flash alternately
RED
and
BLUE
to indicate that the headset is in
pairing mode.
2. Open the Bluetooth ® settings on your
smartphone, tablet, computer or other mobile
device. Follow your device’s pairing instructions
and select the device named “Linea No10.”
3. The
LED
will blink
BLUE
twice to indicate that
the Linea No10 is paired with your device.
4. To pair your Linea No10 with another device,
start with the headset in power
OFF
mode. Hold
the
CENTER
button for 6 seconds. The
LED
will
flash alternating
RED
and
BLUE
to indicate that it
is ready to pa ir.
Note: When more than 8 hosts are paired, the oldest paired
device will be automatically dropped when a new device is
paired. You may completely clear the list of stored devices by
pressing
VOLUME UP
&
VOLUME DOWN
, while the power is on,
until the
LED
flashes
RED
&
BLUE
twice.
The Linea No10 is:
in pairing mode.
paired with your device.
×2
Linea Nº10
Linea Nº1
Linea Nº2
4. 若要將 Linea N º 10 與另一個裝置配
對，請先從關閉電源的耳機開始。按住
「中央」按鈕 6 秒鐘。LED 燈會交替
性地閃爍紅燈和藍燈，以表示耳機已經
準備好進行配對。
附註：如果配對的裝置超過 8 個，則會在與新裝置配對
時，自動捨棄最早配對的裝置。您也可以完全清除所儲存
的裝置清單，方法是在開啟電源的情況下，同時按下「調
升音量」和「調降音量」按鈕，直到 LED 燈閃爍紅燈和
藍燈兩次為止。
Linea N º 10：
處於配對模式
已與裝置配對
將 Linea N
º
10 配對
Linea N º 10 最多一次可記住之前 8 個
連接的裝置。
1.
若是第一次開啟耳機的電源和進行配
對，請按住「中央」按鈕 2 秒鐘。LED
燈會交替性地亮紅燈和藍燈，以表示耳
機正在配對模式。
2.
在您的智慧型手機、平板電腦、電
腦或其他行動裝置上開啟藍牙
®
設定。
依照裝置的配對指示並選名為「Linea
N
º
10 」的裝置。
3. LED 會閃藍燈兩次，以表示 Linea
N º 10 已經與您的裝置配對。
按住 6 秒與另
一個裝置配對。
按住 2 秒進
入配對模式。