CAE Blue Phantom FAST Exam Ultrasound Training... Скачать руководство пользователя страница 13

©2022 CAE 905K004752 v1.0

9

Using the Training Model

3. As users withdraw fluid from the p

ericardi

al space, it is refilled continuously from the IV bag.

Training

This section provides information about using your model for training and practice.

Ultrasound Scanning

Note: CAE Blue Phantom products do not teach ultrasound procedures or techniques. Refer to your 
institution or training program for more information.

To scan with your training model and conduct a simulated ultrasound-guided procedure:

1. Place the model in the appropriate position for scanning.

2. Place ultrasound gel on the transducer or on the training model in an adequate quantity so that

the transducer slides effortlessly on the model. Add more gel as needed.

3. Adjust the ultrasound system controls per your training protocol and the manufacturer’s

instructions. Optimize the image with the ultrasound controls as needed.

Transesophageal Echocardiogram (TEE/TOE)

To do a TEE/TOE simulation, you will need a transesophageal transducer probe. To use a TEE/TOE probe 
in simulation on a training model, you must lubricate both the transducer and the mouth and throat of the 
training model with ultrasound gel. This additional step is necessary because unlike live patients, the training 
model does not have a naturally-lubricated mouth, throat, and esophagus. Ensure the length of the 
transducer is well-lubricated prior to inserting into the esophagus of the training model.

Transducer covers are often used in exams with real patients. Transducer covers are not necessary when 
using a training model, but you may use them for realism if desired. If you use a transducer cover, follow 
these steps:

1. First, cover the tip of the transesophageal transducer with gel.

2. Next, place the transducer cover over the transducer.

3. Then apply gel to the sheathed transducer in adequate quantities so that the probe slides easily

into the model. Add more gel as needed.

Buildup of dried ultrasound gel should not impair echocardiographic imaging and can easily be cleaned 
from the model. For instructions, see the 

Care and Maintenance

 section of this user guide.

CAUTION

Adjust the fluid level (effusion size) only in the pericardial space. Do not adjust heart chamber 
sizes as this will damage the unit.

Содержание Blue Phantom FAST Exam Ultrasound Training...






















Отзывы: