Application
•
Preparation
IMPORTANT! Remove all packaging
material from this product!
Connect the external antenna
to the
controller
via the antenna
connection socket
•
Establish voltage supply
CAUTION! Avoid danger to life from
electric shock!
Plug-in power supply:
➢
Pay attention to the maximum output
voltage of the power supply! (max.
24VDC)
➢
Connect your power supply unit to the
socket for the voltage supply
Power supply unit with open connection
cable:
➢
Connect your power supply unit with
the supplied connector Power supply
➢
Pay attention to the polarity of the
plug and the connecting cable of the
power supply!
The pin assignment can be found on
page 6. Please also pay attention to the
maximum output voltage of your
power supply!
(max. 24VDC)
➢
Connect the wired connector plug
to the controller
To do this, insert the power supply
connector plug into the power
supply socket.
10
1
5
2
8
8
3
•
Establish connection
When you have successfully established
the power supply, you can connect to the
controller as follows:
➢
Open your wireless settings (this may
differ depending on your device).
➢
Search for "WLED-AP" under available
networks
➢
Establish a connection with "WLED-AP
➢
SSID: WLED-AP
➢
Password: WLED1234
➢
Then open your Internet browser
(Firefox, Internetexplorer, Edge, etc.).
➢
Enter
4.3.2.1
in the address bar.
➢
On the home screen, you now have
access to your controller's controls.
•
Usage
A detailed list and description of the
controller's functionalities can be found at
the following links:
https://www.cadsbi-shop.de/downloads/
https://github.com/Aircoookie/WLED/wiki
APP:
IOS
Android
1
8
EN 9