CADO AP-C200, Инструкция по эксплуатации

Страница: 12 / 16

10
Replacing the Deodorizing/Dust
Collecting/Anti-Bacterial Filter
The deodorizing/dust collecting/anti-bacterial filter cannot be
washed with water. Replace it regularly.
The timing to change the deodorizing/dust collecting/anti-
bacterial filter depends on the environment in which the unit
is used, but generally replace it every 6-12 months
*
1
(“*1” on
page 13). When the filter needs to be replaced, the filter
replacement indicator will light up.
4
Install a new filter.
See “Installing the Deodorizing/Dust Collecting/Anti-
Bacterial Filter”(page 6) for instructions on installing the
filter.
1
Unplug the power plug from the wall outlet.
2
Slide down the cover switch on the rear of the unit
a
,
and remove the cover
b
.
Jan.
1
2015
3
Take out the filter.
Jan.
1
2015
When purchasing replacement deodorizing/dust collecting/
anti-bacterial filters (sold separately), please refer to the
model number in “Accessories” on page 13 and
consult your dealer.
5
Reset the filter replacement indicator.
The filter replacement indicator will not turn off even
after the filter has been replaced. The indicator will start
flickering after you press and hold the light button for about
5 seconds. Press the light button one more time to turn off
the filter replacement indicator.
Note
◦ Even when the filter is replaced before the filter replacement
indicators turn on, the indicator will be reset if the operation above is
performed.
◦
If you remove the cover on the rear of the unit during the
operation, the unit stops operating automatically. If you reattach
the cover onto the unit, the unit re-starts operating.
◦
Even if you do not install the filter into the unit, the unit operates,
however, photocatalyst cleaning will not be effective. Make sure
to install the filter correctly.