CADO AP-C200, Инструкция по эксплуатации

Страница: 11 / 16

9
Maintenance
The Unit
Clean the unit and the air inlet and air outlet periodically.
Notes when Cleaning
◦
Before cleaning, make sure to remove the power cord from the wall outlet.
◦
When wiping the unit, always use a soft cloth or cotton swab. Using a stiff brush or something similar may scratch or damage the unit.
◦
When using detergent, always use a neutral detergent. Using any other detergent may cause damage or warp the unit.
Wipe dust from the unit with a soft cloth.
Remove dust from the air inlet and air outlet with a
vacuum cleaner or use a soft cloth to wipe it off.
When it is extremely dirty, use a cloth with watered-down
neutral detergent on it and wipe the filth off.
1
2
Dust Sensor
If dust builds up, the sensor sensitivity will become unstable.
Remove dust every two months or so. Clean the dust sensor
often when using in an environment with excessive dust.
Use a cotton swab or something similar to wipe the air
inlet and air outlet on the dust sensor cover.
Air outlet
Air inlet
Remove the dust sensor cover.
Push A as shown in the illustration
a
, then lay the dust
sensor cover outward
b
.
Dust sensor
cover
①
②
#
Use a slightly dampened cotton swab to wipe the
sensor and surrounding area as well as the air inlet
and air outlet.
Dust sensor
Air outlet
Air inlet
Use a dry cotton swab to wipe the moisture on the
dust sensor, air inlet, and air outlet.
Close the dust sensor cover.
1
2
3
4
5
Deodorizing/Dust Collecting/
Anti-Bacterial Filter
Remove the dust from the net of the side surface of the filter. On
how to remove the filter, see “Replacing the Deodorizing/Dust
Collecting/Anti-Bacterial Filter” (
☞
page 10).