TR-MAN-6010
Operator’s Manual – 6010/8008
Page 15 of 65
Cadman Power Equipment
▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪www.cadmanpower.com
Loading Your Hose Caddy
Prior to loading the Soft Hose Caddy, Cadman Power Equipment
Limited requires that you clean the hoses with a proper clean-out
procedure
(i.e. clean-out ball launcher or water flushing)
. Failure to do
so WILL result in gas build up in the hoses creating a great deal of
pressure. This can cause equipment failure which could result in
serious injury and/or death.
Complete the foll
owing instructions to load your Soft Hose Caddy…
Step 1
Position the Soft Hose Caddy relatively straight to the hose end. Disconnect a
section of the soft hose by uncoupling the clamp.
Never pull more than two (2) empty hoses at one time or your Hose
Caddy WILL be damaged.
Step 2
(if equipped)
Position the Soft Hose Caddy with the tractor so that one end of the soft hose
can be looped under the roller
(if equipped)
and inserted into the opening in the hose
drum.
Figure 16 - Insert Hose into Reel Opening
img-00436-A
