TR-MAN-6005
Operator’s Manual – 6005
Page 14 of 62
Cadman Power Equipment ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪www.cadmanpower.com
Temporary Hose Repair
In some cases your hose may become punctured during regular usage in the
field. If this occurs complete the following steps to temporarily repair your hose.
Step 1
Stop pumping fluid through the hose. Wait until all line pressure has dissipated.
Or use a pair of hose pinchers to isolate the damaged hose
A hose with a puncture may burst. Stay clear of a hose that is
under pressure. Failure to stay clear may result in serious injury.
Step 2
Clean the area with water.
Step 3
Slide the temporary repair sleeve
(equipped on every Cadman Supply Hose)
to the
damaged area of hose.
Figure 14 - Pull Repair Sleeve
img-00444
Step 4
Pressurize the line.
Step 5
Once you have completed pumping, repair the hose using a hose mender. See
page for hose mending parts.