Cadman 4000XL WIDE BODY, Руководство оператора и каталог запасных частей

Страница: 9 / 59

3
SAFETY DECALS
The safety decals on this machine are intended to warn the operator of potentially haz-
ardous areas. These decals must be properly maintained. This includes;
• keeping all safety decals legible
• replacing any decal that becomes illegible
• replacing any decal that is missing
• if applicable, include the current safety decal specified by Cadman Power Equipment Ltd.
on any component installed during repair
Contact Cadman Power Equipment Limited to obtain replacement safety decals.
When replacing safety decals reinstall them onto there proper locations.
SAFETY SHIELDS
The shielding installed on your Cadman Traveller is designed to help guard against
accidental entanglement in the moving parts of the machine. These shields must be removed
ONLY for the purpose of repair or periodic maintenance as described in the “Required Main-
tenance” section of this manual. The shielding MUST be immediately re-installed BEFORE
putting the machine back in service.
STABILIZER LEGS
All Cadman Travellers are equipped with two (2) stabilizer legs. The stabilizer legs
MUST be lowered each time the machine is used, no matter how little hose is pulled out!
Regular inspection of your pipe couplings, tubing and gaskets should be part of
your regular set-up routine. Any defective parts should be replaced or taken out
of service.
Pressurizing your Cadman Traveller must be done slowly and cautiously to
purge all the air from the system before bringing the system up to full operating
pressure. (see “
Field Set Up And Operation ” #16 on pg. 13 for further explana-
tion)
WARNING
Operation of a Cadman Traveller without the shielding in place could re-
sult in serious personal injury or death!
WARNING
Failure to properly use the stabilizer legs may result in unwanted frame
movement or machine upset with the potential to cause serious injury or