15
FOLD THE 2ND-ROW SEATS
Pull the lever on the side of the seat cushion and fold the
seatback forward.
From the cargo area, press the left or right
Seat Release
button (B) on the passenger’s side of the vehicle to fold
either seatback.
To raise a seatback, lift it up until it locks in place.
POWER FOLD THE 3RD-ROW SEATS
♦
1. Unbuckle the seat belts
and remove anything on
the seats or the floor in
front of the seats.
2. From the 2nd-row
seats, press and hold
the bottom of the left
or right
Folding Seat
switch (C) near the door
opening.
3. From the cargo area,
press and hold the
bottom of the left or
right
Folding Seat
switch (D) on the
passenger’s side of the
vehicle.
4. To raise the seatbacks,
press and hold the top
of any
Folding Seat
switch (C or D).
See Seats and Restraints in your Owner’s Manual.
OPEN/CLOSE THE POWER LIFTGATE
Press the
Power Liftgate
button on the Remote Keyless
Entry (RKE) transmitter twice.
Press the
Power Liftgate
knob on the driver’s door.
Press the touchpad above the
license plate to open the
liftgate.
Press the
button next to the liftgate latch to close the
liftgate.
PROGRAMMING THE LIFTGATE HEIGHT
1. Turn the Power Liftgate knob to the 3/4 mode position.
2. Open the liftgate. Adjust it manually to the desired height.
3. To save the setting, press and hold the button next to
the liftgate latch for 3 seconds. The turn signals flash and
beeps sound when the setting is saved.
HANDS-FREE
OPERATION
♦
To open or close the
liftgate hands-free, kick
your foot straight under
the rear bumper, just left
of the license plate. The
RKE transmitter must be
within 3 feet of the
liftgate. The Cadillac logo
is projected on the ground near the rear bumper, indicating
the kicking motion location. The logo is shown for 1 minute,
depending on operating conditions.
See Keys, Doors and Windows in your Owner’s Manual.
Some equipment shown may not be included in your vehicle.
♦
Optional equipment
R E A R S E AT F E AT U R E S
P O W E R L I F T G AT E
C
B
D
