14
FRONT SEATS
REAR SEATS
SET FRONT SEAT MEMORY POSITIONS
♦
With the ignition On or in Accessory mode:
1. Adjust the driver’s
seat, power steering
column and power
outside mirrors to the
desired positions.
2. Press and release the
SET
button on the
driver’s door. A beep
will sound.
3. Immediately press
and hold button 1 or 2 until two beeps sound. Use the button
that matches the Driver Information Center welcome message
indicating driver 1 or 2.
To store seat and power steering column positions for more
clearance when exiting the vehicle, repeat the steps using the
Exit
button instead of button
1
or
2
.
RECALL FRONT SEAT MEMORY
POSITIONS
Press and hold button
1, 2
or
Exit
until the set position is
reached.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned on/off (for exit recall,
the driver’s door must be opened).
To set the automatic recall options, go to Settings > Vehicle >
Seating Position > Seat Entry Memory and Seat Exit Memory.
See Seats and Restraints in your Owner’s Manual.
SLIDE THE REAR SEAT
Lift the bar (A) under the
seat cushion to slide the
seat forward or rearward.
RECLINE THE REAR SEAT
To recline the seatback,
pull the lever (B) on top of
the seatback and move
the seatback to the
desired position. Release
the lever.
FOLD THE REAR SEATBACK
Press the button (C) on the
bottom of the head
restraint post to lower the
head restraint.
Pull the lever (B) on top of
the seatback and fold the
seatback forward.
From the cargo area, pull
the seat release lever (D)
located on either side of
the cargo area to fold
either seatback.
To raise a seatback, lift it
up until it locks in place.
See Seats and Restraints in your Owner’s Manual.
A
B
C
D
