Cadillac SRX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
9087647) - 2016 - crc - 5/4/15
268
Vehicle Care
2. Remove the push pin (1) on
the taillamp cover (2).
3. Remove the taillamp cover
from the lamp assembly by
pulling rearward from the top to
unfasten from the snap tabs.
4. Remove the two screws from
the taillamp assembly.
5. Pull the taillamp assembly
straight back to remove.
6. Disconnect the wiring harness
connector from the back-up
bulb/socket assembly.
7. Turn the back-up bulb socket
counterclockwise to remove it
from the taillamp assembly.
8. Install a new bulb/socket
assembly into the taillamp
assembly, and turn the bulb/
socket clockwise until it clicks.
9. Reinstall the taillamp assembly
and tighten the screws.
10. Reinstall the taillamp cover by
snapping it into place.
11. Push the push pin to secure
the taillamp cover.
License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate. See
Liftgate
0
37
.
Содержание SRX 2016
Страница 1: ......