Black plate (43,1)
Cadillac SRX Owner Manual - 2011
Vehicle Care
10-43
Front Turn Signal Lamp
(Base and Up-Level)
To replace the Front Turn
Signal Lamp:
1. Remove the turn signal lamp
bulb socket from the headlamp
assembly.
2. Remove the turn signal lamp
bulb from the socket.
3. Replace the bulb in the bulb
socket.
4. Install the bulb socket in the
headlamp assembly.
5. For driver side, reinstall the
underhood electrical center
cover by latching three clips.
6. For passenger side, reinstall
the air filter/cleaner assembly
base by pushing to seat.
Verify the base is seated
securely, then install the engine
air filter/cleaner assembly.
Fog Lamps
To replace the fog lamp bulb:
1. Locate the bulb assembly under
the front fascia.
2. Disconnect the electrical
connector from the bulb
assembly.
3. Remove the bulb by turning it
counterclockwise and pulling it
straight out of the assembly.
4. Install the new bulb by turning it
clockwise into the assembly.
5. Reconnect the electrical
connector to the bulb assembly.
Turn Signal Lamps
To replace one of these bulbs:
1. Open the liftgate. See
Liftgate
on page 2
‑
14
.
A. Push Pin
B. Taillamp Cover
2. Pull on push pin (A) to release
the taillamp cover (B).
Содержание SRX 2011
Страница 144: ...Black plate 12 1 Cadillac SRX Owner Manual 2011 4 12 Storage 2 NOTES I n f o r m a t i o nP r o v i d e db y ...
Страница 206: ...Black plate 10 1 Cadillac SRX Owner Manual 2011 6 10 Lighting 2 NOTES I n f o r m a t i o nP r o v i d e db y ...
Страница 276: ...Black plate 8 1 Cadillac SRX Owner Manual 2011 8 8 Climate Controls 2 NOTES I n f o r m a t i o nP r o v i d e db y ...
Страница 452: ...Black plate 114 1 Cadillac SRX Owner Manual 2011 10 114 Vehicle Care 2 NOTES I n f o r m a t i o nP r o v i d e db y ...