6
The drive unit is
electronically controlled
using the shift lever on
the right side of the
steering column. The
selected position is
illuminated in red on the
lever and is shown on the
cluster display.
Park – Press the P
button on the end of the lever to shift into Park.
Reverse – Press the brake pedal and then pull the lever toward
you and up to shift into Reverse.
Neutral – Press the brake pedal and then pull the lever toward
you and hold briefly to shift into Neutral.
Note: The vehicle will not stay in Neutral for an extended period. It will
automatically shift into Park. See Car Wash Mode in your Owner’s Manual.
Drive – Press the brake pedal and then pull the lever toward
you and down to shift into Drive.
See Driving and Operating in your Owner’s Manual.
E L E C T R O N I C P R E C I S I O N
S H I F T
R E G E N O N D E M A N D
D R I V E R M O D E C O N T R O L
The Drive Mode settings automatically adjust various vehicle
systems based on driving preferences, weather and road
conditions.
Select the Drive Mode icon on the infotainment screen to
change the drive mode.
Available modes may include:
Tour – Use in normal driving for a smooth ride.
Sport – Use for enhanced responsiveness.
Snow/Ice – Use for enhanced acceleration on snowy roads.
My Mode – Use for personalized settings of some subsystems,
including acceleration feel, brake feel, steering and motor
sound.
See Driving and Operating in your Owner’s Manual.
Regen on Demand regenerates energy from the vehicle’s
momentum and stores it in the propulsion battery for later use.
To activate Regen on
Demand, pull and hold
the paddle (A) on the
back of the left side of
the steering wheel.
While pulling the paddle,
the vehicle will begin
to decelerate using
regenerative braking. The
paddle is pressure-sensitive and the vehicle will slow more as
the paddle is pulled; continue holding the paddle for greater
regeneration. Regen on Demand is deactivated once the paddle
is released.
See Driving and Operating in your Owner’s Manual.
E L E C T R I C PA R K I N G B R A K E
To apply the parking brake, press the
Parking Brake
button on the left side of the instrument panel.
To release the parking brake, turn on the vehicle, press the
brake pedal, and then press the
button.
The parking brake will release automatically if the vehicle is
placed in Drive or Reverse and an attempt is made to drive away.
See Driving and Operating in your Owner’s Manual.
A
