Cadillac ESCALADE EXT 2005, Руководство по удобству использования и персонализации

Страница: 10 / 20

3. Simultaneously
press and hold
both the
desired button
on HomeLink
and the hand-
held transmitter
button. Do not release the buttons
until Step 4 has been completed.
4. The indicator light will flash slowly at
first and then rapidly after HomeLink
successfully receives the frequency
signal from the hand-held transmitter.
Release both buttons.
5. Press and hold the newly trained
HomeLink button and observe the
indicator light. If the indicator light
stays on constantly, programming is
complete and your device should
activate when the HomeLink button
is pressed and released.
To program the remaining two
HomeLink buttons, begin with Step 2
under “Program HomeLink.”
Do not repeat Step 1, as this will erase
all of the programmed channels.
STEERING WHEEL CONTROLS
(OnStar ® /Radio)
• To activate Personal Calling, press
button “1” below. Pressing this button
also acts as a “barge in” for voice mail.
• PROG: Sequence through stored
presets for AM, FM and XM Radio
(“2” above).
•
p
SOURCE
q
: To select AM, FM1,
FM2, XM1, XM2 Satellite Radio,
cassette, CD, in-dash 6-Disc CD
Changer, RSE (“3” above).
•
p
SEEK
q
: Seek radio stations, CD
tracks (“4” above).
•
p
VOL
q
: Adjust Radio volume
(“5” above).
CRUISE CONTROL
Cruise control allows you to maintain a
constant speed of 25 mph or more
without keeping your foot on the
accelerator pedal.
Setting Cruise Control:
1. Move the cruise control switch to
on ( ).
2. Attain the speed you want to
cruise at.
3. Press in the Set button ( )
at the end of the multifunction
lever on the left side of the
steering column.
4. Take your foot off the accelerator
pedal.
5. The cruise symbol on the
instrument cluster will illuminate.
E S C A L A D E E X T
Note: If your transmitter has a “rolling code”
feature, the above process may not work. Please
refer to your Owner Manual or contact HomeLink
at 1-800-355-3515 (www.homelink.com).
1
2
3
4
5