19
Refer to Owner Manual for further information.
J
Reviewed with Customer (Please Check Box)
Performance &
Maintenance
6-SPEED AUTOMATIC
TRANSMISSION CONTROLS
The 6-speed automatic transmission
has a unique gear range selection
mode called Driver Shift Control that
enables the driver to select the range
of gears desired for the current
driving conditions, such as when
driving on downhill grades.
To use this feature, move the shift
lever to the Manual (M) position and
select a lower or higher driving gear
using the +/– button on the shift
lever. The display on the instrument
panel cluster will show the current
gear selection.
Press the – (minus) side of the
button to downshift. When slowing
to a stop, the vehicle will
automatically downshift.
Press the + (plus) side of the button
to upshift. As vehicle speed
increases, you will need to
manually upshift.
If current vehicle speed is too high
or too low for the requested gear,
the shift will not occur.
STABILITRAK
®
– STABILITY
CONTROL SYSTEM
StabiliTrak is an advanced computer-
controlled vehicle stability and
traction enhancement system that
assists with directional control of the
vehicle in difficult driving conditions.
It turns on automatically every time
you start your vehicle.
To limit wheelspin and help maintain
directional control, you should
always leave the system on. If your
vehicle becomes stuck and rocking
the vehicle is required, the system
should be turned off.
Press the
(StabiliTrak) button,
located on the right side of the
audio system, to turn off the
traction control part of the system.
Press and hold the button for five
seconds to turn off the traction
control and stability enhancement
systems. When the system is turned
off, the StabiliTrak indicator light
will illuminate in the instrument
panel cluster.
Press the
button again to turn
the system back on.
Driver
Information
Safety &
Security
Comfort
Performance &
Maintenance
Owner
Privileges
TM
Entertainment
Convenience
76885_08a_Escalade_ESV_052407.qxd:Escalade_ESV 2007 A 5/24/07 2:32 PM Page 21
