C
T
S
The mirrors can be folded manually
inward to prevent damage in car
washes or garages. Return the
mirrors to their normal positions
before driving. The mirrors also are
heated to clear fog, snow or ice
when the rear defogger is on.
CURB VIEW ASSIST MIRROR
(if equipped)
If your CTS is equipped with the
Memory Seat and Mirrors option, it
will also have the Curb View Assist
Mirror. When activated through the
Driver Information Center (DIC), this
feature will cause the passenger’s
mirror to tilt to a pre-selected
position when the vehicle is shifted
into reverse to assist the driver when
parallel parking. If further adjustment
is needed, the standard power
controls can be used. Five seconds
after shifting out of reverse, the
mirror will return to its original
position. The curb view assist feature
can be enabled/disabled through the
DIC.
MEMORY SEAT AND MIRRORS
Setting Driver’s Position
The buttons to set the seat and
mirror memory are on the driver’s
armrest. To set the memory, first
ensure that seats and mirrors are
“On” in the Personalization section of
the DIC. Then, adjust the driver’s
seat, including the seatback recliner
and both outside mirrors.
1. Press and hold button 1 until two
beeps are heard to confirm
memory setting.
2. Repeat the procedure using button
2 to store memory for a second
driver.
Setting Exit Position
1. Press button 1 or the unlock
symbol on the keyless entry fob
with number 1 on the back.
Adjust the driver’s seat to the
desired exit position.
3. Press and hold the exit button
until two beeps are heard to
confirm exit memory setting.
Repeat the procedure for a second
driver using button 2 or the unlock
symbol on the keyless entry fob
with 2 on the back.
To recall stored exit positions, press
and release the exit button. A beep
will sound and the seat will move to
the memory exit position for the
identified driver. If no exit position is
stored, the seat will move all the way
back.
Vehicles with automatic transmission
must be in PARK to recall exit
positions. For manual transmissions,
the parking brake must be set if the
engine is running.
3
1
2
3627 CTS 9/3/03 6:06 PM Page 12
