Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
9159314) - 2016 - crc - 6/25/15
32
Keys, Doors, and Windows
To program, the vehicle must be off
and all transmitters, both currently
recognized and new, must be
with you.
1. Remove the key from the
recognized transmitter.
2. Place the recognized
transmitter(s) in the cupholder
or on the passenger seat.
3. Remove the key lock cylinder
cap on the driver door handle.
See
Door Locks
0
36
. Insert
the vehicle key into the key
lock cylinder on the driver door
handle; then turn the key
counterclockwise, to the unlock
position five times within
10 seconds.
The Driver Information Center
(DIC) displays READY FOR
REMOTE #2, 3, 4, ETC.
4. Open the center console
storage area and the
storage tray.
5. Place the new transmitter in
the transmitter pocket/insert, in
front of the center console
storage area.
6. Press the ENGINE START/
STOP button. When the
transmitter is learned, the DIC
display will show that it is ready
to program the next transmitter.
7. Remove the transmitter from
the transmitter pocket/insert
and press
K
or
Q
on the
transmitter.
To program additional
transmitters, repeat Steps 4
–
7.
When all additional transmitters
are programmed, press and
hold the ENGINE START/
STOP button for approximately
12 seconds to exit
programming mode.
8. Put the key back into the
transmitter.
Programming without a
Recognized Transmitter
If there are no currently recognized
transmitters available, follow this
procedure to program up to eight
transmitters. This feature is not
available in Canada. This procedure
will take approximately 30 minutes
to complete. The vehicle must be off
and all transmitters to be
programmed must be with you.
1. Remove the vehicle key from
the transmitter.
2. Remove the key lock cylinder
cap on the driver door handle.
See
Door Locks
0
36
. Insert
the vehicle key into the key
lock cylinder on the driver door