Cadillac CUE Infotainment System (GMNA-Localizing-MidEast-10260791) -
2017 - crc - 1/13/16
Rear Seat Infotainment
47
13. POWER
O
.
Press to turn the power on
or off. Each video screen
can be powered on or off
independently.
Infrared Remote Sensor :
Located
in the top center of the video display
screen. Do not block the signal from
the remote to the sensor.
Infrared Transmitters :
Located in
the top center of the video display
screen. Do not block the signal from
the headphones to the transmitters.
Using the RSI On-Screen
Display (OSD) Menus
Use the OSD setup display
menus for:
.
General Setup
.
Audio Setup
.
Video Setup
.
Preference Setup
To use the OSD menus while using
the DVD player or an auxiliary
device:
1. Press SETUP on the remote
control to display the icons and
pages on the display screen.
2. Select the desired page by
using the left/right navigation
arrows to move the cursor.
3. Press SETUP again to cancel
use of the setup display.
Not all DVDs support all of the
feature defaults in the setup menus.
If a feature is not supported, the
defaults are provided by the DVD
media.
General Setup Menu
To set the language for the OSD:
1. Press SETUP on the remote
control.
2. Use the left/right navigation
arrows to navigate the General
Setup Page, then use the down
navigation arrow to select the
OSD language.
3. Press ENTER and then use the
right or left navigation arrows to
select English, Simple/
Traditional Chinese, French,
German, Italian, Spanish,
Portuguese, or Korean. Press
the left navigation arrow to go
back to the previous menu.
The angle mark allows different
viewing angles on the DVD player.
To set the angle mark:
1. Press SETUP on the remote
control.
2. Use the left/right navigation
arrows to navigate the General
Setup Page, then use the down
navigation arrow to select the
Angle Mark.
3. Press ENTER and then use the
right or left navigation arrows to
select On or Off. Press the left
navigation arrow to go back to
the previous menu.