Cadillac Chevrolet Tahoe 2012, Руководство пользователя

Страница: 37 / 100

Black plate (7,1)
Chevrolet Tahoe and GMC Yukon/Yukon Denali Hybrid - 2012
Driving and Operating 9-7
Automatic
Transmission
The vehicle has an electronic shift
position indicator within the
instrument panel cluster.
There are several different positions
for the shift lever.
See “ Range Selection Mode ” in this
section.
P (Park): This position locks the
rear wheels. It is the best position to
use when you start the engine
because the vehicle cannot move
easily.
When parked on a hill, especially
when the vehicle has a heavy load,
you may notice an increase in
the effort to shift out of P (Park).
See
Shifting Into Park on page 9 ‑ 4 .
{
WARNING
It is dangerous to get out of the
vehicle if the shift lever is not fully
in P (Park) with the parking brake
firmly set. The vehicle can roll.
Do not leave the vehicle when the
engine is running unless you
have to. If you have left the
engine running, the vehicle can
move suddenly. You or others
could be injured. To be sure the
vehicle will not move, even when
you are on fairly level ground,
always set the parking brake
and move the shift lever to
P (Park). See
Shifting Into
Park on page 9 ‑ 4 . If you are
pulling a trailer, see “ Driving
Characteristics and Towing Tips ”
in the owner manual.
{
WARNING
If you have Four-Wheel Drive, the
vehicle will be free to roll
— even
if the shift lever is in P (Park) — if
the transfer case is in Neutral. So,
be sure the transfer case is in a
drive gear, Two-Wheel Drive High
or Four-Wheel Drive High or
Four-Wheel Drive Low
— not in
Neutral. See Shifting Into Park
on page 9 ‑ 4 .
R (Reverse): Use this gear to
back up.
Notice: Shifting to R (Reverse)
while the vehicle is moving
forward could damage the
transmission. The repairs would
not be covered by the vehicle
warranty. Shift to R (Reverse) only
after the vehicle is stopped.