Cadillac ATS/ATS-V Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
9956102) - 2017 - crc - 5/11/16
DRIVING AND OPERATING
251
SET
−
:
Press the control down briefly
to set the speed and activate cruise
control. If cruise control is already
active, use to decrease vehicle speed.
To decrease speed by 1 km/h (1 mph),
press SET
−
down to the first detent.
To decrease speed to the next 5 km/h
(5 mph) mark on the speedometer,
press SET
−
down to the second detent.
*
:
Press to disengage cruise control
without erasing the set speed from
memory.
Setting Cruise Control
If
J
is on when not in use, SET
−
or
+RES could get bumped and go into
cruise when not desired. Keep
J
off
when cruise is not being used.
1. Press
J
.
2. Get up to the desired speed.
3. Press and release SET
−
.
4. Remove your foot from the
accelerator.
When the cruise control has been set
to the desired speed, the cruise
control indicator appears green on the
instrument cluster and a cruise set
speed message appears on the
Head-Up Display (HUD), if equipped.
Resuming a Set Speed
If the cruise control is set at a desired
speed and then the brakes are applied
or
*
is pressed, the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed reaches about
40 km/h (25 mph) or more, briefly
press +RES up to the first detent. The
vehicle returns to the previous set
speed.
Increasing Speed While Cruise
Control is at a Set Speed
If the cruise control system is already
activated:
.
Press and hold +RES up until the
desired speed is reached, then
release it.
.
To increase vehicle speed in small
increments, briefly press +RES up
to the first detent. For each press,
the vehicle goes about 1 km/h
(1 mph) faster.
.
To increase vehicle speed in larger
increments, briefly press +RES up
to the second detent. For each
press, the vehicle speed increases
to the next 5 km/h (5 mph) mark
on the speedometer.
The speedometer reading can be
displayed in either English or metric
units. See
.
The increment value used depends on
the units displayed.
Reducing Speed While Cruise
Control is at a Set Speed
If the cruise control system is already
activated:
.
Press and hold SET
−
down until
the desired lower speed is reached,
then release it.
.
To decrease the vehicle speed in
small increments, briefly press
SET
−
down to the first detent. For
each press, the vehicle goes about
1 km/h (1 mph) slower.
.
To decrease the vehicle speed in
larger increments, briefly press
SET
−
down to the second detent.