Fig. 3
5.
Pull radio forward to reveal connectors (See
Fig. 4
)
Fig. 4
Radio connectors
6.
Disconnect 8-pin gray plug from radio (See
Fig. 4
) and connect to
installation harness 8-pin black connector (See
Fig. 5
).
Fig. 5
8-pin connector
7.
Connect installation harness 8-pin black plug (See
Fig. 6
) to radio
chamber vacated in step 6
Fig. 6
8-pin plug
Warning:
Radio in Bose systems may not be able to provide enough
current to power both amplifier and module in which case module will
connect/disconnect at random in which case red accessory wire
Fig.
6a
must be used to connect module to an alternate location. If
experimenting this issue, please follow alternate instructions below
8.
From
Fig. 6
: Disconnect terminal
from
(default wiring). Connect
terminal
to terminal
(Terminal
not used). Route and connect
other end of accessory wire (See
Fig. 6a
) to
ignition harness under
steering column inside driver's lower-dash kick panel. Panel is supported by
three screws at the bottom and three metal/plastic clips at the top. Tap
accessory wire to ignition harness brown wire
.
Fig. 6a
