Cadillac ELR Owner Manual (GMNA-Localizing-U.S/Canada-9087644) -
2016 - crc - 4/20/15
304
Vehicle Care
jumper cable goes to
positive (+) battery terminal or
a remote positive (+) terminal if
available. Negative (
−
) jumper
cable goes to remote negative
(
−
) terminal if available, or a
heavy, unpainted metal engine
part or a solid engine ground
on the vehicle with the
run-down battery.
Do not connect positive (+) to
negative (
−
) or there will be a
short that may damage the
battery or other parts of the
vehicle. Do not connect the
negative (
−
) cable to the
negative (
−
) terminal on the
run-down battery because this
can cause sparks.
Caution
If the jumper cables are
connected or removed in the
wrong order, electrical shorting
may occur and damage the
vehicle. The repairs would not be
covered by the vehicle warranty.
(Continued)
Caution (Continued)
Always connect and remove the
jumper cables in the correct order,
making sure that the cables do
not touch each other or other
metal.
Connecting the Jumper Cables
1. Connect the red positive (+)
jumper cable to the positive (+)
terminal of the other vehicle
with the run-down battery. Use
a remote positive (+) terminal if
available. Do not let the other
end touch metal.
2. Connect the other end of the
red positive (+) jumper cable to
the positive (+) battery terminal
of the ELR.
3. Connect the black negative (
−
)
jumper cable to the negative
(
−
) battery terminal of the ELR.
Do not let the other end touch
anything until the next step.
4. Make the final connection to a
heavy, unpainted metal engine
part or to the remote negative
(
−
) terminal on the other
vehicle with the run-down
battery.
5. Press the POWER
O
button to
start the ELR. This will wake up
the electronics on the ELR.
The engine will only start if it is
needed.
6. Try to start the other vehicle
that had the run-down battery.
If it will not start after a few
tries, it probably needs service.
Disconnecting the Jumper Cables
1. Disconnect the black negative
(
−
) jumper cable from the other
vehicle that had the run-down
battery. Do not let the other
end of the cable touch anything
until after the next step.
2. Disconnect the black negative
(
−
) jumper cable from the ELR.
3. Disconnect the red positive (+)
jumper cable from the ELR. Do
not let the other end of the
cable touch anything until after
the next step.
Содержание 2016 ELR
Страница 1: ......