Cadillac 2013 Caddilac CTS, Руководство пользователя

Страница: 335 / 482

Black plate (33,1)
Cadillac CTS/CTS-V Owner Manual - 2013 - CRC - 4/18/12
Vehicle Care 10-33
High Intensity Discharge
(HID) Lighting
{
WARNING
The low beam high intensity
discharge lighting system
operates at a very high voltage.
If you try to service any of the
system components, you could be
seriously injured. Have your
dealer or a qualified technician
service them.
After an HID headlamp bulb has
been replaced, the beam might be a
slightly different shade than it was
originally. This is normal.
LED Lighting
This vehicle has several LED lamps.
For replacement of any LED lighting
assembly, contact your dealer.
Fog Lamps
To replace a front fog lamp bulb:
1. Pull out the push-pins on the
underside of the protection
shield to remove the shield.
2. Reach up behind the front
bumper area from under the
vehicle to access the lamp
housing.
3. Remove the electrical connector
from the bulb by lifting the two
plastic clips.
4. Remove the bulb socket from
the lamp housing by turning the
bulb socket one-quarter turn
counterclockwise.
5. Pull the old bulb from the lamp
housing keeping the bulb
straight as you pull it out.
6. Install a new bulb.
7. Reinstall the electrical connector
by pushing in the two plastic
clips.
8. Push the bulb socket into the
lamp housing and turn the
socket one-quarter turn
clockwise.
License Plate Lamp
(Coupe and Sedan)
To replace one of these bulbs:
1. Push the tab to remove the
license plate lamp.
2. Turn the license plate lamp
assembly down to remove it.