Black plate (36,1)
Cadillac Escalade EXT Owner Manual - 2011
10-36
Vehicle Care
Headlamp aiming is done with the
vehicle's low-beam headlamps.
The high-beam headlamps will be
correctly aimed if the low-beam
headlamps are aimed properly.
To adjust the vertical aim:
1. Open the hood. See
Hood on
page 10
‑
5
for more information.
2. Locate the center of the
projector lens of the low
‐
beam
headlamp.
3. Record the distance from the
ground to the center of the
projector lens of the low
‐
beam
headlamp.
4. At a wall, measure from the
ground upward (A) to the
recorded distance from
Step 3 and mark it.
5. Draw or tape a horizontal line (B)
on the wall the width of the
vehicle at the height of the mark
in Step 4.
Notice:
Do not cover a headlamp
to improve beam cut-off when
aiming. Covering a headlamp may
cause excessive heat build-up
which may cause damage to the
headlamp.
6. Turn on the low-beam
headlamps and place a piece of
cardboard or equivalent in front
of the headlamp not being
adjusted. This allows only the
beam of light from the headlamp
being adjusted to be seen on the
flat surface.
Ofrecido por www.electromanuales.com
Содержание 2011 Escalade EXT
Страница 130: ...Black plate 14 1 Cadillac Escalade EXT Owner Manual 2011 4 14 Storage 2 NOTES Ofrecido por www electromanuales com...
Страница 404: ...Black plate 42 1 Cadillac Escalade EXT Owner Manual 2011 10 42 Vehicle Care Ofrecido por www electromanuales com...
Страница 476: ...Black plate 4 1 Cadillac Escalade EXT Owner Manual 2011 12 4 Technical Data 2 NOTES Ofrecido por www electromanuales com...