Cadillac 2010 SRX, Руководство пользователя

Страница: 280 / 470

8-36 Driving and Operating
If the vehicle has the StabiliTrak
®
system and begins to limit wheel
spin while using cruise control, the
cruise control automatically
disengages. See
StabiliTrak System
on page 8 ‑ 33 or Traction Control
System (TCS) on page 8 ‑ 32 . When
road conditions allow the cruise
control to be safely used, you can
apply the cruise control again.
Cruise Control
The cruise control buttons are
located on the left side of the
steering wheel.
T
(On/Off): Press to turn the
system on and off.
+ RES (Resume/Accelerate):
Press to make the vehicle
accelerate or resume to a previously
set speed.
SET − (Set/Coast): Press to set
the speed or make the vehicle
slow down.
[
(Cancel): Press to cancel cruise
control without erasing the set
speed from memory.
Setting Cruise Control
Cruise control will not work if the
parking brake is set, or if the master
cylinder brake fluid level is low.
The cruise control light on the
instrument panel cluster comes on
after the cruise control has been set
to the desired speed.
{
WARNING
If you leave your cruise control on
when you are not using cruise,
you might hit a button and go into
cruise when you do not want to.
You could be startled and even
lose control. Keep the cruise
control switch off until you want to
use cruise control.
1. Press
T
.
2. Get up to the desired speed.
3. Press the SET − button located
on the steering wheel and
release it.
4. Take your foot off the
accelerator.