C
T
S
WIPER CONTROLS
The lever to operate the
windshield wipers and washers
is located on the right side of
the steering column.
(Mist):
Pull the lever down
and release for a single wiping cycle;
hold the lever down for more cycles.
(Off):
Place the lever in this
position to turn off the wipers.
(Delay):
Place the lever in this
position to set a delay between wipes.
(Delay Adjustment):
Rotate the
band on the lever to adjust the
length of the delay between wipes.
The closer you move the band
toward Mist, the longer the delay.
1. (Low Speed):
Place the lever in
this position for slow, steady
wiping cycles.
2. (High Speed):
Place the lever
in this position for rapid
wiping cycles.
Washers:
Press the button located
on the end of the wiper lever to
cycle the windshield washer.
Headlamp Washers (if equipped)
The headlamp washers are
activated when the windshield
washer is activated. This occurs only
when the headlamps are on. To
wash the headlamps, press the
washer button located at the end of
the windshield wiper lever.
HEATED WINDSHIELD WASHER
FLUID (if equipped)
The heated windshield washer fluid
system can help clear ice, tree sap
and bugs from the windshield.
Press the
(Heated Washer Fluid)
button, located on the climate
control system panel, to start four
automatic heated wash/wipe/pause
cycles. The washer fluid may take up
to 40 seconds to heat before the
first cleaning cycle. The remaining
cleaning cycles may take about
20 seconds to occur.
To cancel any remaining cycles, press
the
button again.
Note:
Do not place stickers or other
items on the exterior glass surface
directly in front of the moisture sensor.
Doing this could cause the moisture
sensor to malfunction.
Содержание 2009 CTS
Страница 1: ...CU STOM ER CON VEN IEN C E PERSON ALIZATION GU ID E...
Страница 20: ...25795637A 25795637A...