Cadillac 2006 CTS, Руководство по персонализации

Страница: 11 / 20

HEATED FRONT SEATS (if equipped)
The buttons to heat the driver and
passenger seats are located at each
end of the top row of buttons on the
Climate Controls panel. The ignition
must be on to heat
the seats. When the
ignition is turned off,
this feature is also
turned off.
• To set the heat to LO
(approximately normal body
temperature), press the button
twice for the selected seat. Press
the button once for the HI setting.
Press the button a third time to
turn the heat feature off.
• Your selection will appear in the
climate control system display
panel.
ELECTROCHROMIC DAY/NIGHT
REARVIEW MIRROR WITH
OPTIONAL COMPASS
Mirror Operation
The electrochromic (automatic
dimming) feature becomes active
every time the vehicle is started.
1 . To turn the electrochromic mirror
off or back on while driving, press
and hold the ON/OFF button for
about three seconds. The symbol
on the button will illuminate when
automatic dimming is active.
Optional Compass Operations
If you have the mirror with the
optional compass, the ignition must
be on for the compass to operate.
1 . Press the ON/OFF button once to
turn the compass on or off.
2 . When the compass is turned on,
the upper-right corner of the
mirror will display two characters
for about two seconds, and then
the compass heading.
POWER OUTSIDE REARVIEW
MIRRORS
The controls for both outside
rearview mirrors are located on the
driver’s side armrest.
1 . Press the left or right side of the
rocker switch to operate the
desired outside mirror. The neutral
position will turn the power
operation capability off.
2 . Press the directional arrow on the
control button to move the mirror
in that direction and adjust the
mirror.
❏
Reviewed with Customer (Please Check Box) Refer to Owner Manual for further information.
9
Driver
Information
Comfort/
Convenience
Seats & Mirrors Audio/
Personalization/
Communication
Powertrain &
Maintenance
Owner
Privileges™
1
2
Note: The compass feature may need to
be adjusted for compass variance or
calibrated if the reading is wrong or does
not appear. Refer to your Owner Manual
for procedures.
1 2