Turn Signal/Multifunction Lever
Windshield Wiper Controls
MIST
Turn the WIPER band toward you and
release it for a single wipe cycle. For
more cycles, hold the band on MIST
longer.
WASH
Push the washer PUSH tab to spray
washer solvent on the windshield.
The headlamps, parking and backup
lamps will illuminate when you press the
unlock symbol ( ) on the keyfob
transmitter.
See Section 3 of your Owner Manual.
Getting to Know Your LeSabre
10
Lamp Controls
Interior Lamps
See Section 3 of your Owner Manual for
interior lamp operating instructions.
Daytime Running Lamps
The Daytime Running Lamps will come
on when the ignition is on, the headlamp
switch is OFF, and the transaxle is not in
Park (P).
Twilight Sentinel
This feature automatically switches the
headlamps on and off by sensing how
dark it is outside. You should not have to
manually turn the headlamps on or off.
The Twilight Sentinel control lever is
located to the left of the steering
column. To operate it, slide the lever
from OFF to MAX to adjust the
headlamps ON time from a few seconds
to three minutes, after the ignition has
been turned OFF.
Perimeter Lighting
Notice: Driver #1 and Driver #2 key
fob settings are unique. Refer to DIC
Programming.
