Cadillac 2005 DeVille, Руководство пользователя, Страница: 314 / 416

6. Connect the red
positive (+) cable to the
remote positive (+)
terminal location on the
vehicle with the dead
battery. Use a
remote positive (+)
terminal if the vehicle
has one.
7. Do not let the other end touch metal. Connect it to
the positive (+) terminal location of the vehicle with
the good battery. Use a remote positive (+)
terminal if the vehicle has one.
8. Now connect the black negative (
−
) cable to the
negative (
−
) terminal location of the vehicle with
the good battery. Use a remote negative (
−
) terminal
if the vehicle has one.
Do not let the other end of the cable touch anything
until the next step. The other end of the negative (
−
)
cable does not go to the dead battery. It goes to
a heavy, unpainted metal engine part or to a remote
negative (
−
) terminal on the vehicle with the dead
battery.
9. Connect the other end
of the negative (
−
)
cable to the
negative (
−
) terminal
location on the vehicle
with the dead battery.
Your vehicle has a
remote negative (
−
)
terminal marked
GND (
−
).
10. Now start the vehicle with the good battery and run
the engine for a while.
11. Try to start the vehicle that had the dead battery. If
it will not start after a few tries, it probably needs
service.
Notice: If the jumper cables are removed in the
wrong order, electrical shorting may occur and
damage the vehicle. The repairs would not be
covered by your warranty. Remove the jumper
cables in the correct order, making sure that the
cables do not touch each other or other metal.
5-46