Know your CaDi sensor
A. Status LED
–
LED will flash when setting up and or when the device
is disconnected from Wi-Fi. A steady Green LED is on when connected.
It changes colour from Green to Orange to Red depending on CO2 level,
Green being Ok.
B. Power Port
– Connects the included power adapter with your CaDi
sensor.
C. Reset Button
– Resetting CaDi will allow you to connect to a new Wi-Fi
network (useful if you change the sensor’s location or change your
Wi-Fi password). Using the reset pin supplied and with the CaDi sensor
powered on; Press this button for 8 seconds and then release. If the
sensor has reset correctly the Status LED’s will slowly blink green.
D. Air Vents
– These are important vents that allow air flow through your
sensor – be careful not to block these and leave plenty of space (at
least 10 cm) between other surfaces for optimum performance. Please
refer to ‘Cleaning your CaDi sensor’ (page 7) for more information.
C
B
D
A
4
Back
Front
