14
Channels 1 and 2 should be wired to speakers no lower than 2 ohm loads per channel in stereo. Channel 3 and 4 should be bridged as
per the diagram wiring the woofer to Channel 3 positive side (+) and Channel 4 negative side ( – ) terminals.
Set the crossover mode switch of Channels 1 and 2 to either Full Range or High Pass, while Channels 3 and 4 should be set to Low
Pass. Please see page 11 for RCA input configuration details and instructions when wiring a 3 channel system.
4 Channel Amplifier in 3 Channel Mode (Q3000, Q4000)
LEFT SPEAKER
2-4 OHM
RIGHT SPEAKER
2-4 OHM
SUBWOOFER
MINIMUM IMPEDANCE
4 OHMS