clockwise (right) to increase tension. Additional casting brakes, if applicable, are designed for fine tune
adjustment.
It is normal to experience backlashes when learning how to cast a low profile reel. If you are learning
how to cast, tighten the spool tension knob an extra ¼ to ½ a turn and slowly back it off as you learn to
cast.
REMOVING THE SIDEPLATE
Cadence® baitcast reels are equipped with a removable palm side plate that allows access to the spool
and brake system. To open the side plate, push the side plate release button (see picture) downward
until it disengages.
HOW TO ADJUST THE MAGNETIC BRAKING SYSTEM
Cadence® baitcast reels feature highly tunable magnetic braking systems that deliver superior casting
control. For maximum casting distance and to minimize overrun, it is necessary to adjust the braking
system to match the weight of the lure and angler preference.
Turn the brake adjustment dial (see picture) to fine tune spool tension. A turn of the dial towards the
“MAX” setting moves the magnetic braking system closer to the spool. As the magnets get closer to the
spool, they apply more braking force and slow the rotation of the spool.
BASIC CASTING TECHNIQUE
1.
Depress thumb bar while keeping the tip of the thumb on the spool to control the lure. Hold the
rod and reel so that that handle is pointing upward.
2.
Holding the rod and reel in front of the body, bring the rod backward, so the tip reaches a point
above and behind the shoulder. To cast, bring the rod back in front of the body in a single
motion without stopping
MAINTENANCE
Gently rinse your Cadence® reel with fresh water, and wipe it dry after each use. Rinsing is especially
important if you use the reel in salt or brackish water.
You will need to lubricate your reel periodically. If used a lot or in harsh conditions, it may need
lubrication more than once a year. At a minimum, it should be lubricated once a year. Please refer to the
grease guide to determine where to apply lubricant. Use a high-quality oil and grease like Reel Saver.