Cadel IDRO PRINCE3 12, Руководство по установке

Страница: 19 / 46

9
IDROSTUFE
9 USE
9.1 INTRODUCTION
To have the best performance with the lowest consumption please follow the here descripted instructions.
• The lightning of the pellets occurs very easily if the installation is correct and if the chimney flue is efficient.
• Switch on the stove at Power 1 for at least 2 hours in order to enable the materials which make up the boiler and the fireplace
to adjust the inner springing stress.
• By using the stove the varnish inside the combustion chamber could be subjected to alterations. This occurrence can be attri-
buted to different reasons: an excessive stove overheating, the presence of chemical agents in bad quality pellets, bad chimney
draught, etc. Therefore varnish endurance in the combustion chamber cannot be guarantee.
Oily plant waste and lacquers can cause smells and smoke during the first working hours: it is advisable to
ventilate the room because they could be noxious to people and animals.
Set values from 1 to 5 are defined by the manufacturer and they can be changed only by an authorized tech-
nician.
9.2 CONTROL PANEL DISPLAY
Menu items.
Fig. 6 - Display Fig. 7 - Display
LEGEND Fig. 6 - Fig. 7
1 Boiler lighting/shutdown (ESC)
2 Scrolling of programming menu to decrease
3 Menu
4
Scrolling of programming menu to increase
5 Decrease set temperature/programming functions
6 Increase set temperature/programming functions
7 Display
8
Time
9 Status
10 Temperature set by user
11 Instant power
12
Ambient temperature
13 If there is "." = 0.5 °C (29.° = 29.5°)
9.3 MAIN MENU
It is accessed by pressing key 3 (menu). The items that are accessed are:
• Time and Date
• Timer
• Sleep (only with the stove on)
• Settings
• Info