Cadel ACCENT AIRTIGHT, Руководство по установке

Страница: 18 / 40

STUFE A PELLET
18
5.3 GENERAL INSTALLATION
Fig. 23 - General installation
LEGEND Fig. 23
1 Stove
2
Minimum lateral distance = 300 mm
3 Minimum rear distance = 200 mm
4 Minimum front distance = 1000 mm
• It is obligatory to install the stove away from walls and/or pieces of furniture, with a minimum air flow of 300 mm on the sides
and 200 mm on the back, to enable an eficient appliance cooling and a good distribution of heat in the room (see Fig. 23 ).
• If the walls are made up of flammable materials, check the safety distances (see Fig. 23 ).
• At maximum power check that the wall temperature does not ever exceed 80°C. If it would be necessary please install a fire
resistant plate on the concerned walls.
• In some countries also masonring load-bearing walls are considered flammable.
5.4 STOVE DOOR REMOVAL/INSTALLATION
For some operations (e.g.: side panel assembly and cleaning) you must remove the stove door.
To remove the door:
• Open the door.
• Undo the screws from the upper hinge (see
Fig. 24
).
• Remove the hinge, keeping the door in position (see Fig. 25 ).
• Lift the door and release it from the lower hinge (see
Fig. 26
).
• To assemble, proceed in reverse order.
Fig. 24 - Removing the screws Fig. 25 - Remove the hinge Fig. 26 - Remove the door