caddytrek R2 S-Series Скачать руководство пользователя страница 2

Страница: 2 / 2

Pg.

Step 6:

Remove Bag Support Bar. Use the

2.5 mm hex wrench and loosen the set screw
inside joint(s) to remove the bag support bar.

Step 7:

Replace the defective part; bag

support bar or joint(s).

INSTALLATION

Step 8

: Align the set screw on joint to the

screw hole on bag support bar, then tighten.
Repeat for other joint. DON’T over tighten!

Step 9:

Install the Upper Joint Assembly to frame.

Use rubber mallet and gently tap into place. Align
holes, insert screws, and tighten.

Step 10:

Install Pull Handle to Upper Joint

Assembly. Use rubber mallet to gently tap into
place. Align holes, insert screws and tighten.

Step 11:

Loosen black knobs, squeeze joint

together, insert screws, then tighten. DON’T
over tighten. Repeat for the other joint.

The End:

Congratulations, you have

successfully replaced the upper joint assembly

Содержание R2 S-Series

Страница 1: ...ws loosen the black knob and squeeze joint together Use the needle nose plyers to pull screw out Do this for both joints UPPER JOINTS and BAG SUPPORT REMOVAL AND REPLACEMENT SOP Step 3 Using a rubber...

Страница 2: ...for other joint DON T over tighten Step 9 Install the Upper Joint Assembly to frame Use rubber mallet and gently tap into place Align holes insert screws and tighten Step 10 Install Pull Handle to Up...