Pg.6
I.
U
NIT
O
PERATION
Standby (SB) Mode
Standby (SB) Mode is a starting point for all other CaddyTrek
modes. When turned on the unit will automatically enter into
SB mode and wait for further instruction from the user.
While in SB mode:
1.
CaddyTrek’s wheels will be locked.
2.
The unit will automatically sync with the handset.
3.
You should not push the CaddyTrek.
Manual Push
1.
Make sure CaddyTrek is on level ground.
2.
Make sure CaddyTrek and the handset are powered off.
3.
Guide CaddyTrek with the push bar.
4.
CaddyTrek will not automatically brake when the power is
off, so use caution on hills and steep slopes.
Remote Control (RC) Mode
1.
Power on the CaddyTrek.
2.
Position yourself behind the large wheels of CaddyTrek
with your chest facing the caddy.
3.
Hold down the “Left” directional button until the handset
emits a short beep and the RC light will turn on.
4.
Press the STOP button once to stop the unit. CaddyTrek will
remain in RC Mode.
Содержание CS-2025-UD
Страница 1: ...User Manual CS 2025 UD Rev 1 06 ...
Страница 24: ...Pg 24 NOTES ...