Assemble the Buggy
Lift the upper bag holder
bracket.
Make sure the handle height
adjusting knob is fully tightened.
Pull the handle and upper bag
bracket as shown in Fig. 2 to
extend the buggy. (Shake the
buggy slightly to release the main
frame from the holding slot.)
Release the wheel locking lever,
insert the wheel axel into the wheel
holder completely and then tighten
the locking lever.
The
buggy
is
fully
extended as shown in
Fig.
6.
Fig. 1
Fig. 2
Fig. 4
Fig. 5
Fig. 6
locking lever
2
As shown in Fig
4
, press the
button and rotate the front
wheel 180 degree clockwise
so the front wheel is at centre
of the buggy.
button
Handle
Height
Adjusting Knob
button
button
Fig. 3
Press the button on both
sides of the golf bag holder
mechanism to unfold the bag
support wings automatically
as shown in Fig. 3.
Unfolding Motion
