CADDY PF01302, Инструкция по установке и эксплуатации

Страница: 4 / 60

4
IMPORTANT NOTE
THE INSTALLATION OF THIS CENTRAL HEATING SYSTEM MUST BE PERFORMED BY A
QUALIFIED TECHNICIAN. PSG RESERVES ITSELF THE RIGHT TO VOID ITS WARRANTY
OR DENY TECHNICAL ADVICE IF THE FURNACE HAS NOT BEEN SOLD OR INSTALLED BY
A PROFESSIONAL.
REGISTER YOU WARRANTY ONLINE
To receive full warranty coverage, you will need to show evidence of the date
you purchased your furnace. Keep your sales invoice. We also recommend
that you register your warranty online at
http://www.Mini-Caddyfurnaces.com/en/warranty/warranty-registration
Registering your warranty online will help us track rapidly the information we
need on your furnace.
1. INTRODUCTION
This furnace operates like an EPA wood burning stove. This applies to the lighting, the ember bed, and the minimum
combustion air intake which was determined based on the use of good seasoned cordwood.
The Mini-Caddy furnace is EPA certified and tested and approved according to the CSA B415.1-10 Standard.
To optimize the efficiency of your furnace, here is some advice that you should follow when installing or operating your
Mini-Caddy.

Respect the local codes (when in doubt, consult your local dealer);

Make sure your furnace is installed according to the instructions on the certification label;

All controls and adjustments must be performed by a qualified technician. The blower speed must conform to
the recommendations of local codes and should respect the static pressure ranges in the hot air plenum of the
furnace.
We recommend that our wood burning hearth products be installed and serviced by professionals who are certified in
the United States by NFI (National Fireplace Institute
®
) or in Canada by WETT (Wood Energy Technical Training) or in
Quebec by APC (Association des Professionnels du Chauffage).